Zxr400h1 handlebar conversion need help

Moderator: Moderators

Post Reply
Deathomen
Posts: 4
Joined: Sun Jan 08, 2012 11:44 pm
My Bike: Zxr400h1

Zxr400h1 handlebar conversion need help

Post by Deathomen »

Hi my name is joseph
i need some advice in how to change my handlebars from clipons to renthal handlebars on my zxr400h1 to compleat its transformation from racer to streetfighter.
heres a pic of what iam working with
You do not have the required permissions to view the files attached to this post.
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: Zxr400h1 handlebar conversion need help

Post by Mori Man »

A pair of bar clamps fitted onto the top bridge like these:
600x461-2009102200007.jpg
(Although I would get two bolt ones for the 400)

or have a custom top bridge made with the bar clamps as part of the design.

MM!
You do not have the required permissions to view the files attached to this post.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
ZX4R-F3
Posts: 95
Joined: Thu Jan 13, 2011 1:03 am
My Bike: 1988 ZX400-F3
Location: Ashton-u-Lyne

Re: Zxr400h1 handlebar conversion need help

Post by ZX4R-F3 »

Hi,

Image
[b][color=#FF0000]If your not living on the edge, then your taking up to much room.[/color][/b]
Deathomen
Posts: 4
Joined: Sun Jan 08, 2012 11:44 pm
My Bike: Zxr400h1

Re: Zxr400h1 handlebar conversion need help

Post by Deathomen »

yeah i thought about attaching risers and bolting them on and welding them but thought that the yoke would break since its not a solid bit its hollow underneeth
but yeah i gess iam gona try it i can always buy another off ebay xD
ty guys
ZX4R-F3
Posts: 95
Joined: Thu Jan 13, 2011 1:03 am
My Bike: 1988 ZX400-F3
Location: Ashton-u-Lyne

Re: Zxr400h1 handlebar conversion need help

Post by ZX4R-F3 »

If you know a welder, you could get them to back fill the underneath of the top yoke and fill the void, then smooth it off afterwards making it more solid and adding depth to fix risers too.
[b][color=#FF0000]If your not living on the edge, then your taking up to much room.[/color][/b]
stephen k
Posts: 18
Joined: Fri Sep 23, 2011 4:53 pm
My Bike: kh250

Re: Zxr400h1 handlebar conversion need help

Post by stephen k »

HI HAVE YOU DONE THIS CONVERSION YET HAS I,M LOOKING AT DOING THE SAME THING THANK STEPHEN
Post Reply