Screen support bracket L2

Moderator: Moderators

Post Reply
shjones
Posts: 12
Joined: Sun Mar 27, 2011 8:00 pm
My Bike: ZXR 400

Screen support bracket L2

Post by shjones »

Help, I think this is bent, well I'm pretty sure it as as the new screen I put on bent then cracked and snapped ! Took it off and the right side is higher than the left. Previous owner dropped it and I just keep finding more and more problems when trying to restore it :-( does anyone know the part number and where I can get one from? Please help I'm almost there now with my restoration.
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: Screen support bracket L2

Post by RedexRobB »

You should be able to straighten it out, although they are a pain to get right but perseverance will get you there. You will know when its straight as the upper body work will fit on without any pulling, twisting or bending.

jap4performance do alluminium ones but i forget the price.
shjones
Posts: 12
Joined: Sun Mar 27, 2011 8:00 pm
My Bike: ZXR 400

Re: Screen support bracket L2

Post by shjones »

Thank you so much for the reply, I'm gonna go for the aluminium :-) they look good and its too much like hard work to bend the existing one back.

Once again thank you for your reply big help.

Steve
Post Reply