Page 1 of 1
Thread Pitch info.....
Posted: Sat Jul 07, 2012 4:57 pm
by CaNsA
Righto,
I need to fit my sports rack this week but the thread in the subframe has been stripped at the front and the bolt cant grip it, a longer bolt will sort the prob.
They fit in the middle of the rear panels.
The stock bolt is a screw headed M6, 14mm (i think) Part number 92009-1287
What i need to know is the thread pitch so i can order a couple of 160mm, M6, HS 8.8, hex headed bolts.
Any ideas?
Re: Thread Pitch info.....
Posted: Mon Jul 09, 2012 12:19 am
by banner001
ill check for you in the morning, it will be 1mm or 1.25mm
Re: Thread Pitch info.....
Posted: Mon Jul 09, 2012 12:24 am
by CaNsA
Cheers homie
Re: Thread Pitch info.....
Posted: Mon Jul 09, 2012 11:25 am
by banner001
forgot
ill check when i get home, gonna set a reminder for myself now, sorry, i have a terrible memory...just what you need as a doctor
Re: Thread Pitch info.....
Posted: Mon Jul 09, 2012 6:54 pm
by banner001
Mine is M6x16mm 1mm thread pitch
Re: Thread Pitch info.....
Posted: Mon Jul 09, 2012 7:12 pm
by CaNsA
cheers dude.
Re: Thread Pitch info.....
Posted: Tue Jul 10, 2012 9:55 am
by banner001
no probs mate, i see you have recovered from 'needhelp' "kicking your head in with 7 mates"
i bought a probolt measuring gauge a while back so i can measure other bolts if necessary...
Re: Thread Pitch info.....
Posted: Tue Jul 10, 2012 10:02 am
by CaNsA
needhelp/zxr400project are the same retard.
wasting my fucking time. I waited in all weekend for man-tits to arrive.
Re: Thread Pitch info.....
Posted: Tue Jul 10, 2012 10:12 am
by banner001
CaNsA wrote:needhelp/zxr400project are the same retard.
wasting my fucking time. I waited in all weekend for man-tits to arrive.
cant be, this is zxr400project
