UPDATE Very bent frame worth a check if you're buying
Moderator: Moderators
-
- Posts: 4
- Joined: Wed Nov 13, 2013 8:07 pm
- My Bike: Kawasaki ZXR400 1998
UPDATE Very bent frame worth a check if you're buying
Hello all, recently bought back my ZXR for £100 when someone cut across my path at traffic lights, wasn't a high speed crash, at first I thought the forks had just twisted or misaligned but after slackening and re tightening the yokes and fork assembly my wheel is still way back. I didn't think much of it but there is paint flaking off the frame below the yokes where the engine cast mounts are welded. Has anyone else had there frame bent in this way, seems like the forks should bend before the entire frame as it a substantial piece of frame but sadly everything points to it :-/ I've put up some pics can people compare with there frames, I know these frame have dimples in the top part by the tank but mine seems kinked where the small hole is also there is small paint flaking which could be a sign of stress but these formations are the same on both sides? Any help would be great, I know frames with log books aren't majorly expensive.
UPDATE
Here are some pics of my bent frame oddly not bending any steering components or forks!
UPDATE
Here are some pics of my bent frame oddly not bending any steering components or forks!
You do not have the required permissions to view the files attached to this post.
Last edited by oldskoolracer on Sun Apr 05, 2015 7:26 pm, edited 1 time in total.
-
- Posts: 4
- Joined: Wed Nov 13, 2013 8:07 pm
- My Bike: Kawasaki ZXR400 1998
Re: Bent frame or bent yokes? In a front end crash :-/
Picture of the other side hard to see the distortion but the paint flaking can be seen.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 4
- Joined: Wed Nov 13, 2013 8:07 pm
- My Bike: Kawasaki ZXR400 1998
Re: UPDATE Very bent frame worth a check if you're buying
You do not have the required permissions to view the files attached to this post.
-
- Posts: 4
- Joined: Wed Nov 13, 2013 8:07 pm
- My Bike: Kawasaki ZXR400 1998
Re: UPDATE Very bent frame worth a check if you're buying
You do not have the required permissions to view the files attached to this post.
Last edited by oldskoolracer on Sun Apr 05, 2015 7:33 pm, edited 1 time in total.
-
- Posts: 63
- Joined: Fri Feb 05, 2016 12:26 pm
- My Bike: 400h
Re: UPDATE Very bent frame worth a check if you're buying
Usd forks are VERY strong and most bikes with them will bend the frame before the forks..seen it a few times....very rigid they are and alloy frames are surprisingly weak.... ![:smt017](./images/smilies/017.gif)
![:smt017](./images/smilies/017.gif)
-
- L-plate hell
- Posts: 479
- Joined: Sun Oct 12, 2008 11:12 am
- My Bike: ZXR400 L4, ZX6R F1 track
- Location: Chesterfield
Re: UPDATE Very bent frame worth a check if you're buying
I bent my frame when I had a head on collision with a cow (bovine creature rather than some of the female gender) and didn't want to replace my frame so had it jigged. May be cheaper getting a new frame but at least I know it's definitely straight now
-
- Posts: 63
- Joined: Fri Feb 05, 2016 12:26 pm
- My Bike: 400h
Re: UPDATE Very bent frame worth a check if you're buying
Yep a mate of mine years ago smashed his rd500 in to a car who u turned in front of him..had the frame jigged at motoliner..but it never rode the same after that..he sold it for £1500 (in 1990!)and got £1500 from the guys insurance so was happy with 3 grand as they were only worth 2 odd then..the guy who bought it said it 'rode lovely'.!!. ![:smt017](./images/smilies/017.gif)
![:smt017](./images/smilies/017.gif)
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: UPDATE Very bent frame worth a check if you're buying
thats not bent! this is bent!!!! lol
You do not have the required permissions to view the files attached to this post.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 63
- Joined: Fri Feb 05, 2016 12:26 pm
- My Bike: 400h
Re: UPDATE Very bent frame worth a check if you're buying
I've taxed worse
ll...(that's fooked!!)
![:smt016](./images/smilies/016.gif)
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: UPDATE Very bent frame worth a check if you're buying
bit of t-cut will sort it ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said![:smt003](./images/smilies/003.gif)
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
![:smt003](./images/smilies/003.gif)
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: UPDATE Very bent frame worth a check if you're buying
with cable ties and gaffer tape toobanner001 wrote:bit of t-cut will sort it
sorted.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::