I own a SYM Wolf 150 with ZXR400 H`s engine, but my CDI is broken, so I buy an ZXR400 L`s CDI on the internet
However I found that the CDI between “H” and “L” ver. Is quite different, the “L” type CDI has two more PIN.
How do I change the PIN position if I want to replace with the “L” type CDI
Sorry, my country uses Chinese So my English is not good
2 posts • Page 1 of 1
- Posts: 1
- Joined: Sat Jul 08, 2017 1:34 pm
- My Bike: SYM T1 (ZXR400 Engine)
- zxr400 oc member
- Posts: 119
- Joined: Mon Jan 12, 2009 12:04 pm
- My Bike: ZXR400L5
- Location: Newport Shropshire
Does the picture show your new CDI (L) and the old one (A)? They are for the L model and H model respectively. If your old one was the A, then it would be easier to obtain another, rather than try to adapt the L. The A CDI restricts the speed, but since you seem to have a bike that originally had a 150cc engine, you have plenty in hand!
You do not have the required permissions to view the files attached to this post.