LED indicator problem
Moderator: Moderators
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
LED indicator problem
this is confussing me why
fitted front and rear led indicators and also led flasher relay
first problem i had was when i indicated right all four flashed and the same when i indicated left, after removing the bulb on the indicator reminder the problem was solved indicate left and left flash and same with the right.
But then i fitted a led bulb in the reminder light and its back to all four flashing.
Anyone know how to solve it?
fitted front and rear led indicators and also led flasher relay
first problem i had was when i indicated right all four flashed and the same when i indicated left, after removing the bulb on the indicator reminder the problem was solved indicate left and left flash and same with the right.
But then i fitted a led bulb in the reminder light and its back to all four flashing.
Anyone know how to solve it?
-
- zxr400 oc member
- Posts: 212
- Joined: Mon Jun 20, 2011 10:25 pm
- My Bike: ZXR400L1/VT750C2B/VT600
- Location: Norwich, England
- Contact:
Re: LED indicator problem
should imagine its a current issue,
wrong indicator relay coz theres still too much going through the system?
or summat i duno lol
i couldnt get the front AND rear to go either, ive only got the front led, the rear is normal,it works fine...
wrong indicator relay coz theres still too much going through the system?
or summat i duno lol
i couldnt get the front AND rear to go either, ive only got the front led, the rear is normal,it works fine...
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
Re: LED indicator problem
they flash fine until i put a bulb in the reminder light
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
Re: LED indicator problem
This is really getting on my nerves now tried a number of differen LED bulbs now
-
- Posts: 48
- Joined: Tue Nov 15, 2011 4:58 pm
- My Bike: zxr 400 L1
- Location: Doncaster
Re: LED indicator problem
Check all the wires and connectors might just be wires making contact that shouldnt hence all coming on t the same time it could be shorting something out x
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
Re: LED indicator problem
wiring has been checked and looks fine.
Still got the problem
Still got the problem
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: LED indicator problem
How do the LED indys earth ?
Check the connection inside them, try earthing them out yourself with additional wire and see if it cures it then make a permanent solution.
Wrong relays usually have them flashing at the wrong rate.
Check the connection inside them, try earthing them out yourself with additional wire and see if it cures it then make a permanent solution.
Wrong relays usually have them flashing at the wrong rate.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
Re: LED indicator problem
just brought a couple of led load resistors to fit to the rear ones to see if they help and gonna leave the front leds to run off the led relay
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
Re: LED indicator problem
solved the problem by putting a 50w resistor on each of the rear led indicators.
Now have my light flashing on the indicator panel when they are on and the resistors also solved my 10%-100% flash
Now have my light flashing on the indicator panel when they are on and the resistors also solved my 10%-100% flash
-
- Posts: 11
- Joined: Tue Aug 30, 2011 5:14 pm
- My Bike: zxr 400
Re: LED indicator problem
Hi there I was just wondering how and where you fitted the resistors for the indicators as I am having the same problem with mine
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
Re: LED indicator problem
I fitted 1 to each rear led indicator and changed the relay to a led onearmo wrote:Hi there I was just wondering how and where you fitted the resistors for the indicators as I am having the same problem with mine
-
- Posts: 11
- Joined: Tue Aug 30, 2011 5:14 pm
- My Bike: zxr 400
Re: LED indicator problem
Yes that what I tryed to do and some reason I seem to have all 4 on at once still it's really confusing me now, but if I put a extra bulb set of indicators on the front it works fine, it's frying my brain at the minute haha
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: LED indicator problem
tink wrote:solved the problem by putting a 50w resistor on each of the rear led indicators.
Now have my light flashing on the indicator panel when they are on and the resistors also solved my 10%-100% flash
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 11
- Joined: Tue Aug 30, 2011 5:14 pm
- My Bike: zxr 400
Re: LED indicator problem
I am gonna sound like a idiot now but I did all that but still doesn't seem to of worked, wondering if any body had any ideas