Hey everyone
Please could someone advise me of my problem,my neutral light wont come on hence only start with clutch in,i have replaced the switch cleaned the wire changed the bulb and stand switch and clutch/start switch works,looked at wiring diagram where light green wire goes and it goes into the junction box where there is a starter relay built into that if im right could this be the last place to look befor i shell out more money or is there a way i can bypass it
Thanks
zxr 400 L (91) neutral switch/light not on
Moderator: Moderators
-
- Posts: 6
- Joined: Fri Mar 09, 2012 9:52 pm
- My Bike: zxr 400l 91 plate
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: zxr 400 L (91) neutral switch/light not on
Try that again, but make it clearer and think about what you have typed before you post it.
Throw in a bit of grammar and punctuation too.
Oh and "corporate bullshit phrase speak" doesn't go down all that well here.
None of this "please advise" crap.
Throw in a bit of grammar and punctuation too.
Oh and "corporate bullshit phrase speak" doesn't go down all that well here.
None of this "please advise" crap.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 6
- Joined: Fri Mar 09, 2012 9:52 pm
- My Bike: zxr 400l 91 plate
Re: zxr 400 L (91) neutral switch/light not on
sorry
Last edited by daddycrane1978 on Fri Mar 09, 2012 11:46 pm, edited 2 times in total.
-
- Posts: 6
- Joined: Fri Mar 09, 2012 9:52 pm
- My Bike: zxr 400l 91 plate
Re: zxr 400 L (91) neutral switch/light not on
as the post goes,my neutral light on my dash isn't on, so i checked the following,Bulb,changed neutral switch,traced wires back to junction box seem ok,i looked in the online wiring manual and it states the Light green wire goes to junction box and thought maybe that's the fault but aint a motorbike mechanic,also after bike has been started with clutch in and stand is up it will allow the bike to carrying on running but wont do this with the stand down and clutch out,does this help better
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: zxr 400 L (91) neutral switch/light not on
This is better....
daddycrane1978 wrote:Hi, got a bit of a prob.....
My neutral light on my dash isn't working.
I've checked the following, Bulb, neutral switch, traced wires back to junction box and it all seem ok.
With the bike running, and the clutch fully in the bike will keep ticking over.
However, with clutch out, side stand down the bike wont run.
Any ideas?
Cheers
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: zxr 400 L (91) neutral switch/light not on
Now that i have sorted that out...
The engine wont run if the bike is in any gear with the side stand down. Its a safety feature, don't worry about it.
Can you click through the gears?
If you have a paddock stand, get the back wheel off the ground and test it.
I'm thinking buggered selector forks at the moment.
The engine wont run if the bike is in any gear with the side stand down. Its a safety feature, don't worry about it.
Can you click through the gears?
If you have a paddock stand, get the back wheel off the ground and test it.
I'm thinking buggered selector forks at the moment.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 6
- Joined: Fri Mar 09, 2012 9:52 pm
- My Bike: zxr 400l 91 plate
Re: zxr 400 L (91) neutral switch/light not on
i can click through all the gears fine and put into neutral with clutch out and stand up, just no light comes on
cheers
cheers
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: zxr 400 L (91) neutral switch/light not on
I know you said you have checked the bulb, but have you tried a new one?
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 6
- Joined: Fri Mar 09, 2012 9:52 pm
- My Bike: zxr 400l 91 plate
Re: zxr 400 L (91) neutral switch/light not on
yes tried a new one with no luck ,thought maybe wiring at fault or junction box but not sure
-
- Posts: 6
- Joined: Fri Mar 09, 2012 9:52 pm
- My Bike: zxr 400l 91 plate
Re: zxr 400 L (91) neutral switch/light not on
Fixed it yay,i did a continuity check from the switch to the junction box (light green wire) and nothing so i ran a new wire and hey presto neutral lights on and can start bike with stand down