wiring on junction box scheme

Moderator: Moderators

Post Reply
matilda54
Posts: 13
Joined: Fri Mar 25, 2011 9:34 am
My Bike: kawasaki zxr 400 L1

wiring on junction box scheme

Post by matilda54 »

Hello everyone,
I ask for help.
I need to know the exact sequence of wires going into the connector of the fuse box, especially the first connector on the left, not from the light to understand
would take a picture of the connector so that you see the colors of the wires or see in your ZXR 400 L model, and possibly communicate.
without this information can not easily proceed with the works of Rebuildin
35119.jpg
g of my kawasaki ZXR 400 L1 (1991).
thanks to those who will give me a hand
You do not have the required permissions to view the files attached to this post.
thomp1983
Posts: 86
Joined: Tue Jul 19, 2011 11:21 pm
My Bike: zxr 400 l3

Re: wiring on junction box scheme

Post by thomp1983 »

the wiring diagram with colours is in the manual which can be found on this site, there is also an internal circuit diagram for the junction box there aswell, it doesn't tell you exactly which colour goes to which pin but if you use the two diagrams together you should be able to figure it out, if not ill take a picture of mine tomorrow at some point

chris
matilda54
Posts: 13
Joined: Fri Mar 25, 2011 9:34 am
My Bike: kawasaki zxr 400 L1

Re: wiring on junction box scheme

Post by matilda54 »

thans chris,it'll be great if u can post a photo of your wiring also to work on my bike quikly.
certainly i'll post the done work.
there are a lots of woriking hors that only the passion can encourage.
thomp1983
Posts: 86
Joined: Tue Jul 19, 2011 11:21 pm
My Bike: zxr 400 l3

Re: wiring on junction box scheme

Post by thomp1983 »

photo's aren't much use due to how the loom is taped up so ill type the wiring colours for you. ive labelled the connector pins 1 to 10, number 1 is the top left pin, number 10 is the bottom right pin (as you look at your photo's), not all of the pins are used,

1, black/red
2, yellow/green
3, yellow/red
4, not used
5, not used
6, light green
7, not used
8, not used
9, green/black
10, green/white

hopefully that will help,

chris
matilda54
Posts: 13
Joined: Fri Mar 25, 2011 9:34 am
My Bike: kawasaki zxr 400 L1

Re: wiring on junction box scheme

Post by matilda54 »

chris thanks for your help has been crucial to continue the work, but unfortunately not exhaustive and in any case anything were to serve for your ZXR 400 let me know that I have many pieces I have for the most in 'on my bike.
to continue the work I need the diagram also connect the other kings of the junction box (circled in green in the photo) because there must be some consensus there, too, without which the bike will not start.
thanks again for everything and I hope that with this additional help riesta to solve all electrical problems.
You do not have the required permissions to view the files attached to this post.
thomp1983
Posts: 86
Joined: Tue Jul 19, 2011 11:21 pm
My Bike: zxr 400 l3

Re: wiring on junction box scheme

Post by thomp1983 »

1 is top left again, 8 bottom right

1, white/blue
2, white
3, blue
4, brown
5, red/green
6, not used
7, not used
8, red/white
ttpllo
Posts: 1
Joined: Sun Jun 24, 2012 10:17 pm
My Bike: kawasaki zx400g 1988

Re: wiring on junction box scheme

Post by ttpllo »

I have a ZX400G '88. I need help with CDI...
If anyone could post a picture or something about it, will be appreciated
Post Reply