Hi all,
Been stripping my new bikes electrics and have found an M Max box plugged in to the loom from the UK speedo.
I have seen these on NC30's but cant find any info on here about them being used on ZXR's?
Has anyone ever seen one used or know what it's for?
The loom on this bike has been cut to bits and added to and properly bodged.
Also the wires to teh starter lockout switch have been cut, do these need to be reconnected ( I am guessing they do?)
Cheers
M Max box
Moderator: Moderators
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: M Max box
its just a very expensive way of paying for a 50p resistor...it there to fool your cdi into thinking you are going slower than you actually are.
check out the stickys by rob on the "restricted bikes" subsection...loads of info in there for you.
check out the stickys by rob on the "restricted bikes" subsection...loads of info in there for you.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 14
- Joined: Sun Jun 09, 2013 8:55 pm
- My Bike: Speedfight 100
Re: M Max box
Thanks mate,
I tried serching for M max and loom mods but must have missed that thread.
Cheers
I tried serching for M max and loom mods but must have missed that thread.
Cheers
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: M Max box
The M max box derestricts the the CDI, it fools it into thinking the bike never reached 110mph. Its not required if you have the blue M labeled CDI.
As for the starter lockout switch, its there purely to stop you from driving off with the side stand down, so if you want that feature then re-connect. Otherwise leave it.
As for the starter lockout switch, its there purely to stop you from driving off with the side stand down, so if you want that feature then re-connect. Otherwise leave it.
-
- Posts: 14
- Joined: Sun Jun 09, 2013 8:55 pm
- My Bike: Speedfight 100
Re: M Max box
Thanks Rob, Yes i think i'll leave it for now.
I have also noticed that the orange wire from the main loom (i think it might be one of the wires for the flasher unit relay) has been cut
Have you ever come across this before?
I have also noticed that the orange wire from the main loom (i think it might be one of the wires for the flasher unit relay) has been cut
Have you ever come across this before?