Whilst putting my bike back together after a year of sorting it out I have to plugs in my new loom which I don't know what they are for and are both located under the fuel tank
First one is the black plug
Next one is the white plug with a single cable
What are these plugs for
Moderator: Moderators
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
What are these plugs for
You do not have the required permissions to view the files attached to this post.
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: What are these plugs for
black one defo looks like the fan connector.
not sure about the single white one...looks "home made". if i remember my wiring you have got it wired to the LHS switch gear for the dipped/main switch judging by the wire colour...but why is another matter.
not sure about the single white one...looks "home made". if i remember my wiring you have got it wired to the LHS switch gear for the dipped/main switch judging by the wire colour...but why is another matter.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- zxr400 oc member
- Posts: 230
- Joined: Fri Sep 16, 2011 11:55 am
- My Bike: ZXR400 L2
- Location: Nuneaton
What are these plugs for
I'm a donut the black one was for the for the fan which was still off the bike lol
Just gotta work out the white one but if the bike runs and works fine once I start it I might just leave it
And yes it is on the LHS switch gear
Just gotta work out the white one but if the bike runs and works fine once I start it I might just leave it
And yes it is on the LHS switch gear
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: What are these plugs for
all i can think, is that it connects to switch to the high/low fuse and/or the high/low bulbs...check around for single connectors that you might have missed.
connect the battery and see if high/low works, if it does i would leave it unconnected for now.
connect the battery and see if high/low works, if it does i would leave it unconnected for now.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said