zxr400 h1 rectifier plug burnt out
Moderator: Moderators
-
- Posts: 1
- Joined: Sun Jan 25, 2015 4:49 pm
- My Bike: zxr400 h1
zxr400 h1 rectifier plug burnt out
Hi everyone, working on my brothers h1 the other day investigating a poor starting issue and I noticed the plug going to the rectifier is burnt out. Is the plug the same as an L9 or will I have to use another h1 plug?
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: zxr400 h1 rectifier plug burnt out
can you post a pic?
the L9 should be a standard large 6 pin (2 x 3) white connector.
if not you can use standard 6.3mm female spade connectors and just splice them into the loom.
i would also be investigating why it burnt out, was it on the main power (its the white wire on the L models) line?
the L9 should be a standard large 6 pin (2 x 3) white connector.
if not you can use standard 6.3mm female spade connectors and just splice them into the loom.
i would also be investigating why it burnt out, was it on the main power (its the white wire on the L models) line?
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said