Hazard lights
Moderator: Moderators
-
- Posts: 44
- Joined: Sun Aug 10, 2014 1:37 pm
- My Bike: ZXR 400, L1, UK Model
Hazard lights
Hi all, I have an L1 and when my alarm goes off all my indicators flash - I was wondering if I could wire a switch to the battery and to both indicators to have hazard lights? Is it as simple as that?
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Hazard lights
Why?
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 44
- Joined: Sun Aug 10, 2014 1:37 pm
- My Bike: ZXR 400, L1, UK Model
Re: Hazard lights
Thanks for the help
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Hazard lights
Thanks for answering the question.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 197
- Joined: Fri Jan 25, 2013 12:33 pm
- My Bike: CBR600RR, ZXR400 L-2
- Location: Waterlooville, Hampshire
Hazard lights
It would be very simple, however not quite what you said, that would just leave you with the indicators on and not flashing.
All you would need, is a 12v flasher relay with 2 terminals, and a double pole, double throw switch.
Put basically, you'd have to wire +12v to the relay from your battery, from the switch to the relay, and out to the indicators.
I could knock up a wiring diagram if you need
All you would need, is a 12v flasher relay with 2 terminals, and a double pole, double throw switch.
Put basically, you'd have to wire +12v to the relay from your battery, from the switch to the relay, and out to the indicators.
I could knock up a wiring diagram if you need