Page 1 of 1
Hazard lights
Posted: Sun Jul 26, 2015 11:56 pm
by TurkishJordo
Hi all, I have an L1 and when my alarm goes off all my indicators flash - I was wondering if I could wire a switch to the battery and to both indicators to have hazard lights? Is it as simple as that?
Re: Hazard lights
Posted: Mon Jul 27, 2015 1:16 am
by CaNsA
Why?
Re: Hazard lights
Posted: Mon Jul 27, 2015 11:42 am
by TurkishJordo
Thanks for the help
Re: Hazard lights
Posted: Mon Jul 27, 2015 8:06 pm
by CaNsA
Thanks for answering the question.
Hazard lights
Posted: Tue Jul 28, 2015 8:27 pm
by JamieNeve
It would be very simple, however not quite what you said, that would just leave you with the indicators on and not flashing.
All you would need, is a 12v flasher relay with 2 terminals, and a double pole, double throw switch.
Put basically, you'd have to wire +12v to the relay from your battery, from the switch to the relay, and out to the indicators.
I could knock up a wiring diagram if you need