H model wiring loom routing

Moderator: Moderators

Post Reply
User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

H model wiring loom routing

Post by jamesgoodfella » Tue May 24, 2016 9:15 am

Can some one take a photo of the wiring loom routing for their zxr400 H model. Couldn't figure about the best way to route it and like a rookie I didn't take enough photos
masterofinsanity wrote:or use a Duplo brick :smt002

User avatar
fstarocka
Posts: 40
Joined: Wed May 04, 2016 6:33 am

Re: H model wiring loom routing

Post by fstarocka » Wed Oct 12, 2016 5:14 pm

hi - same issue here.. best i could find was the bad pics in the manual - is your loomed taped up? Mine runs from the left side - the radiator hose runs along the top of the cyl head inside frame.. i tried mine around the frame but it was pinching.. my front wiring is all visible by left handle bar so not cool -

User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

Re: H model wiring loom routing

Post by jamesgoodfella » Tue Oct 18, 2016 1:59 pm

The loom was taped, the manual routes the cables with no problems. That's what did mine to.
masterofinsanity wrote:or use a Duplo brick :smt002

Post Reply