Page 1 of 1

pink wire missing from new loom

Posted: Thu Feb 16, 2017 9:41 pm
by kevwye
Hi guys
i have brought a new loom and it has not got a pink wire where my old loom did is this going to be a issue , i have looked under pink wire but all i can find is
how to do the restriction bypass which my orrigal loom had
i planning on using a digital dash so hopefully this wont be a issue

Thanks in advace kev

Re: pink wire missing from new loom

Posted: Tue Feb 21, 2017 9:57 am
by banner001
your bike is an L2 yes, what letter and colour CDi are you using, and what clocks do you have (kph, mph?)

Re: pink wire missing from new loom

Posted: Wed Mar 01, 2017 7:54 pm
by kevwye
Hi banner
sorry for the long reply , its a 91 so thinks thats a l1 , it did have kph clocks on but where changed to mph , there was also a inline resitor to bypass the
rev limit , the cdi is a L ,blue sticker , im planning on running a digital dash so hopfully this will not cause any issues
thank for the reply
kev

Re: pink wire missing from new loom

Posted: Thu Mar 02, 2017 10:00 am
by banner001
you need to get a blue M CDi as the blue L CDi are speed restricted (i thought they were UK ones, but the blue L is definitely restricted as i bought one and tried it out for myself)

the resistor is not a rev restrictor, that was your speed limit restrictor bypass on your previous loom/clock combination.

so you need to buy a M CDi (http://www.ebay.co.uk/itm/Kawasaki-ZXR- ... Sw2gxYsIRb), you dont need to bother with the resistor and/or pink wire anymore, and you can run any clocks you want.

Re: pink wire missing from new loom

Posted: Fri Mar 03, 2017 6:37 pm
by kevwye
Hi banner
thanks for the reply uk spec cdi hear we come
cheers again kev