Page 1 of 1
only fireing on 2 cyilinders
Posted: Fri May 25, 2007 7:37 pm
by sole
is there anthing to look out for or is it just a case of running through all of the conectors the other 2 somtimes kick in and out
Posted: Sun May 27, 2007 10:54 pm
by tomzxr400
if they kick in and out check wiring mainly earths other than that check the whole system start at plugs and work back id check your ht leads are screwed in tight first they tend to unscrew then coils and pick up coil all tests are in the mauals on this site good luck
Posted: Mon May 28, 2007 11:25 am
by rene
first check that your getting a spark at the plug do this by takeing the plug out and tutching it to the engine (in a very dark room) then try to start it if you see the spark then you no its not the plug so more likly to be fuel!
if you arnt getting a spark then get a multi meter on the Coil and check that your getting 12Vs if not then work your way back checking every conector. if it is fireing on to then you should be getting a good earth but its always worth checking!