Page 1 of 1
pick up output
Posted: Wed Sep 12, 2007 4:32 pm
by cbr chris
just changed the CAM chain and tensioner on my 1990 H and now have intermittent spark! Can anyone give me the expected reading in Ohms for the pick up. Oh and any other suggestions would be great!!
Chris
Re: pick up output
Posted: Thu Sep 13, 2007 6:15 pm
by tomzxr400
did you tighten the pick up coil allen bolt on the crank? the readings are in the h manual for what the resistance should be and all the tests to check it other than that check coils , ht leads are secure (very common fault) and test ic unit.
Re: pick up output
Posted: Thu Sep 13, 2007 8:00 pm
by cbr chris
Cheers Tom,
Gap on pick up was about 8ft too much!!! Running sweet now so can race this weekend!!
