SP unit undertray

Moderator: Moderators

Post Reply
User avatar
Miles
zxr400 oc member
zxr400 oc member
Posts: 498
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

SP unit undertray

Post by Miles »

Hey. Could anyone tell me if the SP tail unit came with an undertray?
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: SP unit undertray

Post by Mori Man »

yup , most likely removed for racing though along with the end subframe.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
User avatar
Miles
zxr400 oc member
zxr400 oc member
Posts: 498
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

Re: SP unit undertray

Post by Miles »

Ok no problem, out of interest does the sp unit just slide on the subframe with plate fitted after?

Asking as I have a tail unit based on the SP unit but it has doesn't have any holes for light, plate etc Not a problem as I will cut the holes but didn't want to cut off the under tray if possible
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: SP unit undertray

Post by Mori Man »

Rear sub is in two parts - end piece looks like a swiss cheese with the holes in it - this holds the rear light unit.

The main section supports the seat unit hence the later part is removed for track bikes as not needed.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Post Reply