Page 1 of 1

Tyga conversions question?

Posted: Mon Jun 15, 2009 12:12 pm
by nathboiii
Ok well the tyga website has a complete bodykit for the zxr250 so i was just wondering if this kit would fit the 400 L? Cheers guysss

Re: Tyga conversions question?

Posted: Mon Jun 15, 2009 1:25 pm
by masterofinsanity
i would certainly like to try it!

Re: Tyga conversions question?

Posted: Tue Jun 16, 2009 11:45 am
by RedexRobB
If youve got the patience and time you can fit anything i reckon. chrissBB fitted a ZX6 bodykit to his.

Re: Tyga conversions question?

Posted: Fri Jun 15, 2012 1:16 am
by hoddie
Did anyone go anywhere with this?

Re: Tyga conversions question?

Posted: Thu Jul 26, 2018 3:12 pm
by Norwegian400L1
Hi!

How did this work out? Love that rear fairing! ( in my opinion the only body figure that the 400L misses)

Found a step-by-step fitting modul on the zxr250 subframe here: http://tyga-performance.com/images/00ps ... ninjas.pdf

Can it be done on the 400, or does det 250 subframe fit/adjust to the 400L mainframe?

Has anyone tried something like that? I've seen a lot of questions on previous posts, but no feedback/pics on results..

thanks :)

Re: Tyga conversions question?

Posted: Thu Jul 26, 2018 5:19 pm
by banner001
its a 9 year old post...doubtful it came to anything...

ive got both a zxr250 and a 400, the 250 is quite narrow, and i can 100% confirm that the subframe wont natively fit a zxr400L unless you want to be sat at a 30 degree incline :d

Re: Tyga conversions question?

Posted: Thu Jul 26, 2018 8:02 pm
by Norwegian400L1
Hi!

Yeah, I saw it was an old post, but thought i should ask either way :)

Thanks for the response! My newbie-ness shines through, but I would rather ask a "stupid" question, then not know at all biggrin

Well... that sounds like a rather awful position to ride :P

Re: Tyga conversions question?

Posted: Thu Jul 26, 2018 8:49 pm
by banner001
The zxr400L subframe width is 236mm, my '89 zxr250 is 180mm...