Bike: ZXR400 H1 - Standard Downpipes
Okay,
Firstly evening!
I have recently brought a ZXR400 H1 that i'm totally rebuilding from ground up, looking good
My question is this:
The bike currently has no exhaust gaskets at block side.. I've located the end-can one but not the four from block.
Looking at the following microfiche:
http://www.zxrworld.co.uk/images/hmicro ... xhaust.gif
I've found part no: 11009a.
My question is, are the L model gaskets the same?
http://www.zxrworld.co.uk/images/Lseries/lheaders.gif
looking at the above (L - 11009 manifold and the end-can is 11009a) and (H - 11009a manifold and the end-can 11009) - Totally different gaskets?
Would these be any good:
http://cgi.ebay.co.uk/KAWASAKI-ZXR-400- ... 2c4be0dbe0
http://cgi.ebay.co.uk/Kawasaki-ZXR400-Z ... 53e15c3687
I know they are L models but any difference? I'll probably end up calling Cradley in the morning...
Thanks in advanced,
Ryan
ZXR400 H1 - Exhaust Gaskets.
Moderator: Moderators
-
- Posts: 21
- Joined: Sat Sep 11, 2010 3:05 pm
- My Bike: ZXR400 H1
-
- Posts: 21
- Joined: Sat Sep 11, 2010 3:05 pm
- My Bike: ZXR400 H1
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: ZXR400 H1 - Exhaust Gaskets.
Cradleys is your best bet.
If you look at the tables on the fiches, there is the rest of the part number shown. So yes, it seems they are different in some way going by the 'whole' part number
If you look at the tables on the fiches, there is the rest of the part number shown. So yes, it seems they are different in some way going by the 'whole' part number
-
- Posts: 21
- Joined: Sat Sep 11, 2010 3:05 pm
- My Bike: ZXR400 H1
Re: ZXR400 H1 - Exhaust Gaskets.
I thought so, wasn't sure though.
Thanks for clearing that up for me
Thanks for clearing that up for me