My exhaust is blowing where the manifold joins the head, can you buy the flanges from anywhere? As 2 of them don't fit correctly and it doesn't pull the exhaust in evenly into the head. Should there be gaskets that go in first?
Thanks matt
Micron exhaust problems
Moderator: Moderators
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Micron exhaust problems
Yes.bude-zxr wrote:Should there be gaskets that go in first?
-
- Posts: 94
- Joined: Sun Jun 10, 2012 9:24 pm
- My Bike: ZXR 400 L4
Re: Micron exhaust problems
I bought some ally ones but it looks like if I put them in the studs won't be long enough.
-
- Posts: 77
- Joined: Thu Jan 03, 2013 1:26 am
- My Bike: ZXR 400 L9
Re: Micron exhaust problems
You want some copper ones matey!bude-zxr wrote:I bought some ally ones but it looks like if I put them in the studs won't be long enough.
11009 here - http://www.kawasakioriginalparts.com/ka ... lock_03=mc
-
- Posts: 94
- Joined: Sun Jun 10, 2012 9:24 pm
- My Bike: ZXR 400 L4
Re: Micron exhaust problems
Cool thanks, also my exhaust has no springs where the manifold joins the rear section where can I get these?