Page 1 of 1
Micron exhaust problems
Posted: Fri Mar 15, 2013 6:20 pm
by bude-zxr
My exhaust is blowing where the manifold joins the head, can you buy the flanges from anywhere? As 2 of them don't fit correctly and it doesn't pull the exhaust in evenly into the head. Should there be gaskets that go in first?
Thanks matt
Re: Micron exhaust problems
Posted: Fri Mar 15, 2013 6:32 pm
by RedexRobB
bude-zxr wrote:Should there be gaskets that go in first?
Yes.
Re: Micron exhaust problems
Posted: Fri Mar 15, 2013 6:35 pm
by bude-zxr
I bought some ally ones but it looks like if I put them in the studs won't be long enough.
Re: Micron exhaust problems
Posted: Fri Mar 15, 2013 6:45 pm
by Columbo
bude-zxr wrote:I bought some ally ones but it looks like if I put them in the studs won't be long enough.
You want some copper ones matey!
11009 here -
http://www.kawasakioriginalparts.com/ka ... lock_03=mc
Re: Micron exhaust problems
Posted: Fri Mar 15, 2013 7:09 pm
by bude-zxr
Cool thanks, also my exhaust has no springs where the manifold joins the rear section where can I get these?