www.zxrworld.co.uk

Hi guys.

I have the standard downpipes, and end can.

I want to get some more noise from this bike, does the PipewerX end can fit original pipes ?
If not, does anyone know about slip on cans for the original pipes ?

The original pipes aren't slip on.

Is one of these recommended then ?

http://viewitem.eim.ebay.no/Kawasaki-ZX ... 90498/item

http://viewitem.eim.ebay.no/ZXR400-ZXR- ... 16965/item

Maybe this one ?

http://viewitem.eim.ebay.no/Kawasaki-ZX ... 13650/item

EDIT:

I read a little bit about it, and it seems to me that " Micron " system is the best downpipes ?
Do you know where i could get one ?

Thanks so much for replying

your second link (http://viewitem.eim.ebay.no/ZXR400-ZXR- ... 16965/item) will allow you to use 3-bolt bolt-on cans, or 52mm slipons, the delkavic exhausts are replicas of the originals and wont allow you to use anything other than a 3-bolt exhaust (with the same bolt-spacing as the original can).

micron are a ~60+mm outlet and are generally seen as a "race" exhaust, if you can get one, congratulations, they are getting rarer

I think i will go for the SandySpare pipes.

Do some of you guys know if PipewerX cans will fit these pipes?

If not maybe another silencer ?

best bet is email pipewerx, i think its a 3-bolt fitting, but if not, just ask them what diameter slip-on it will fit.

yeah the pipewerx can do fit the original downpipes, i had a chat with one of the guys at nec