Flanges

Moderator: Moderators

Post Reply
Rasta-ninja
Posts: 92
Joined: Fri Jun 10, 2011 9:46 am
My Bike: zxr 400 L8
Location: worcester

Flanges

Post by Rasta-ninja » Sun Jun 30, 2013 5:38 pm

Im fitting the sandybikes downpipes on, the flanges are different in shape to the standard downpipes. My problem is im unsure if the flanges need to be tightened until they cover the unthreaded part of the exhaust studs(because on the standard system the flanges are cone shapped so i couldnt tell!!)
cheers!

Post Reply