Zxr400 aftermarket exhaust

Moderator: Moderators

Post Reply
JordBanny
Posts: 13
Joined: Tue Apr 12, 2016 7:20 am
My Bike: KAWASAKI ZXR400 L9
Location: BlackPool

Zxr400 aftermarket exhaust

Post by JordBanny » Tue Apr 12, 2016 7:28 am

Hi, so I bought my zxr400 the other week.. Clean bike and all, but the end can is a Mercury exhaust.. Sounds nice, but the pipe is too long for the bike in my opinion..
I've been looking at all sorts on the web, but I can't find anything compatible, is there any links I can check out?
Looking for a hex carbon can.. Not too bothered about make to be honest..

Thanks smiler

User avatar
Miles
zxr400 oc member
zxr400 oc member
Posts: 455
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

Re: Zxr400 aftermarket exhaust

Post by Miles » Tue Apr 12, 2016 10:25 am

Have you tried eBay? There's endless amounts in all shapes and sizes by a company called hawk.

JordBanny
Posts: 13
Joined: Tue Apr 12, 2016 7:20 am
My Bike: KAWASAKI ZXR400 L9
Location: BlackPool

Re: Zxr400 aftermarket exhaust

Post by JordBanny » Tue Apr 12, 2016 11:15 am

I've seen the hawk end cans, but I like the "toro carbon fibre" would that work? It's 51mm inlet. So it will fit, but will it mess with the carbs?

JordBanny
Posts: 13
Joined: Tue Apr 12, 2016 7:20 am
My Bike: KAWASAKI ZXR400 L9
Location: BlackPool

Re: Zxr400 aftermarket exhaust

Post by JordBanny » Tue Apr 12, 2016 11:25 am

https://www.ebay.co.uk/ulk/itm/321928931674

That's the link to the can..

Thanks

User avatar
Miles
zxr400 oc member
zxr400 oc member
Posts: 455
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

Re: Zxr400 aftermarket exhaust

Post by Miles » Tue Apr 12, 2016 12:08 pm

Some companies & people say that the can won't affect the carbs but the only way too do it right is to fit the can then to dyno the bike.

Kwak built the bike with the parts it came with so by altering the system it will need 'reset'

shaggy69
Posts: 63
Joined: Sat Jun 18, 2011 8:10 pm
My Bike: ZXR 400 Racebike

Re: Zxr400 aftermarket exhaust

Post by shaggy69 » Thu Apr 14, 2016 2:29 pm

I'm about to sell an Arrow Hex end can off of my ZXR race bike. Fits into 51mm link pipe on my Beet System and sounds superb. It won't let me add pic as it says file is too large. Available to forum members for £145 before I EBay it...let me know an email addy or phone number and I can send pix. Derek 07825 908653

Post Reply