race can

zxrnewbie · Post by **zxrnewbie** » Mon Aug 13, 2007 2:25 am

hi i just aquired a race can for my zxr400 and what i was wondering is how do i fit it as ive noticed the standard can has 2 bolts holding in on while the race can has 3 bolts i was was wondering how i go about fitting the new can if is possible

thanks john

RedexRobB · Post by **RedexRobB** » Mon Aug 13, 2007 4:00 am

Hi there welcome to the forum

The standard can should also have three bolts holding it in place, check round where the bolts are and try and find a third, maybe its round the back and you cant see it because the pipe is in the way? If you have any pictures post em up.

Post by **masterofinsanity** » Mon Aug 13, 2007 9:52 am

or maybe 1 of them has fell out?

zxrnewbie · Post by **zxrnewbie** » Tue Aug 14, 2007 3:25 pm

had a look around the original can and theres only 2 bolts 1 at the top and the other at the bottom so any ideas

Post by **deviant** » Tue Aug 14, 2007 3:45 pm

well that's quite wierd!

The body of your can is quite definitely standard kawasaki. but the end isnt...

I don't really know what to suggest. Other than pull it apart and try to figure out how it's been modified from standard.

The Pole · Post by **The Pole** » Tue Aug 14, 2007 4:07 pm

Could it be a false flange on the end of the pipe? am sure that on mine the bolts sit proud where as that looks more flush. my thoughts are that if you undid those 2 bolts you would find that piece falls away and reveals what should be seen. the original flange with 3 bolts that sits in the bottom of the can itself.

RedexRobB · Post by **RedexRobB** » Wed Aug 15, 2007 8:11 am

Thats right its a false flange, very rare to see them still there actaully, first time ive ever seen a ZXR with one still on it! Ive got one on my 7R which vibrated loose and fell off somewhere, which i expect thats what happens to most of them

All you need to do is unscrew that and the bolts for the can should present themselves

zxrnewbie · Post by **zxrnewbie** » Wed Aug 15, 2007 11:26 pm

thanks everyone it was a false flange then the normal 3 bolts underneath

The Pole · Post by **The Pole** » Wed Aug 15, 2007 11:31 pm

Holy crap! I was useful? not sure if this has happened before....

RedexRobB · Post by **RedexRobB** » Thu Aug 16, 2007 7:04 am

The Pole wrote:Holy crap! I was useful? not sure if this has happened before....

1 useful post in 81, well done mate

Post by **deviant** » Thu Aug 16, 2007 9:21 am

RobB wrote:
The Pole wrote:Holy crap! I was useful? not sure if this has happened before....
1 useful post in 81, well done mate

some of us have got to ten times that and not said anything useful yet

Post by **rene** » Thu Aug 16, 2007 9:43 am

was about to say 1 out 80 posts to be usfull has got to get him in the top 10 of usfull posters!

The Pole · Post by **The Pole** » Thu Aug 16, 2007 7:13 pm

LMFAO! I feel ever so proud of myself.

I will try not to do it again though...would hate to make a name for myself.

www.zxrworld.co.uk

race can

race can

Re: race can

Re: race can

Re: race can

Re: race can

Re: race can

Re: race can

Re: race can

Re: race can

Re: race can

Re: race can

Re: race can

Re: race can