Just a quick question, looking for a new exhaust system for my L9. I quite fancy the Micron D race system, now is this too too too load for the road or will I be ok? Has anyone got one fitted to their road bike? any probs with this system?
Thank you, Nick.
Micron race system
Moderator: Moderators
-
masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Micron race system
micron seems to be a popular choice for race systems, if its the same as Gem had they are awesome!
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
rene
- zxr400 oc member
- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: Micron race system
the micron system is really quite at lower RPM and has a nice buz to it at the higher RPM's
Mate has a RaceFit slash cut on his bike that makes car alarms ect go off and never had any hassel from the police, louder the better!
Mate has a RaceFit slash cut on his bike that makes car alarms ect go off and never had any hassel from the police, louder the better!
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
-
Gemini
- cloning technology
- Posts: 1323
- Joined: Fri Nov 15, 2002 1:57 pm
- My Bike: CBR1000RR4 Fireblade
- Location: Shrewley, Warwickshire
Re: Micron race system
thats y i went for micron, low revs they r normal, high revs they scream their heads off
There's No Explanation For The Way I'm About To Behave!!!
-
jake
- zxr400 oc member
- Posts: 1016
- Joined: Mon Oct 02, 2006 10:03 pm
- My Bike: tomos moped
- Location: wirral
Re: Micron race system
take the naff baffle out of the link pipe and they get a bit louder 
...
...-
zimm
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: Micron race system
works with stock pipes toojake wrote:take the naff baffle out of the link pipe and they get a bit louder
-
rene
- zxr400 oc member
- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: Micron race system
took that baffel out of my micron system didint make a huge diffrence! i've seen one with a stubbyed micron can and that sounded/looked the dogs dangels
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
-
nick_c
- zxr400 oc member
- Posts: 29
- Joined: Sun Oct 07, 2007 9:52 pm
Re: Micron race system
Cheer's Guy's, a race system it is then.
-
Mavve750
- Posts: 61
- Joined: Fri Jul 18, 2008 3:11 pm
- My Bike: 5 ninjas and one R1.
- Location: Sweden
Re: Micron race system
Where can you buy this racesystem? Can you get it in both alu or titan?nick_c wrote:Cheer's Guy's, a race system it is then.
I thought Nassert was the only system for ZXR400?
-
bendog66
- L-plate hell
- Posts: 479
- Joined: Sun Oct 12, 2008 11:12 am
- My Bike: ZXR400 L4, ZX6R F1 track
- Location: Chesterfield
Re: Micron race system
micron don't exist any more, so it'll have to be a second hand system. Scorpion do them, and there's this one on ebay http://cgi.ebay.co.uk/zxr-400_W0QQitemZ ... 286.c0.m14
-
will#224
- L-plate hell
- Posts: 330
- Joined: Sat Aug 09, 2008 11:49 pm
- My Bike: L1 racer
Re: Micron race system
My Micron race system ran up at 98db at brands.
I was looking at getting an MHP can to replace the dented and very heavy Micron. If someone offered me decent money for the system to make buying a full MHP system worth it i'd sell it. Its about £800 for the full stystem i think.
I was looking at getting an MHP can to replace the dented and very heavy Micron. If someone offered me decent money for the system to make buying a full MHP system worth it i'd sell it. Its about £800 for the full stystem i think.