hi all
just ordered my blueflame can hope it was the right thing to do will i have to rejet etc wanted a micron but there bust
new can
Moderator: Moderators
-
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: new can
standard headers ?
h or L model ?
standard filter or KnN ?
h or L model ?
standard filter or KnN ?
-
- Posts: 7
- Joined: Sun Aug 10, 2008 7:10 am
Re: new can
standard headers, standard air filter L1 model thinking about changing downpipes at some point any ideas
-
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: new can
i wouldnt go to the hassle of re-jetting just for a can, it'll make a negligible difference to the fuelling, (the link pipe is baffled as well as the can) and even some full systems (micron? scorpion) dont need bigger jets. I've had 2 stock L's dynoed and setup and they came back with smaller jets than stock !
also, the chances of getting it spot on without going on a dyno are minimal.
i'd run it as is, then get on a dyno once you've bought a full system/filter etc and the bike is as you want it.
also, the chances of getting it spot on without going on a dyno are minimal.
i'd run it as is, then get on a dyno once you've bought a full system/filter etc and the bike is as you want it.
-
- Posts: 7
- Joined: Sun Aug 10, 2008 7:10 am
Re: new can
thanks for the advice do you think the blueflame was the best can choice also whats the best headers
-
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: new can
can's a can mate .. if you like the look of it, then i had a stainless blueflame on an H1, sounded ok.
BEST exhaust ? ... beet titanium (like mine ) or MHP.. either are £££ though (bout what your bike cost).. the delkevic stainless OE copies arent bad (but obviously dont perform any differently to OE) micron is ok, scorpion systems are V pretty, but dont seem to perform that well (might just have been the bike it was on though - setup for a micron)
BEST exhaust ? ... beet titanium (like mine ) or MHP.. either are £££ though (bout what your bike cost).. the delkevic stainless OE copies arent bad (but obviously dont perform any differently to OE) micron is ok, scorpion systems are V pretty, but dont seem to perform that well (might just have been the bike it was on though - setup for a micron)