Sp Rev counter

Moderator: Moderators

Post Reply
User avatar
mark400
Posts: 208
Joined: Fri Feb 06, 2009 11:48 pm
My Bike: Building an original SP

Sp Rev counter

Post by mark400 »

Bought an L model SP without flatslides.

I changed the loom from SP back to L , as the SP loom was a bit ropey, and then had to change the CDI to fit the L Looom - I used the blue M CDI. The bike wouldn't run, until I remembered to change to ingnition pickup back to L too !

Now the bikes runs really well but the rev counter over reads by about 50%, it will go round to 20,000 rpm now ! Obviously, that isn't the correct figure cos the bike has been on the dyno loads of times.

Should I buy a UK rev counter to get the correct reading ? Or is there another fix ?
NG Road Racing Champion 2012 400SS
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: Sp Rev counter

Post by RedexRobB »

dont bother, its the same as any other one. Is the battery well charged? This has come up a few times before and thats usually been the problem.
Post Reply