removing restrictors
Moderator: Moderators
-
- Posts: 6
- Joined: Sun Mar 10, 2013 9:13 pm
- My Bike: zxr400
removing restrictors
im just coming off of my period for needing the restrictors in, ive got a 94 zxr could anybody help as to where the restrictor will be, the restrictors comre from fi international if that helps shed some light atall.
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: removing restrictors
the restrictors are metal plates that go between the carb inlet rubbers and the head.
you will need to remove your rear panels, seat, fuel tank, airbox, carbs and the carb rubbers to get to them.
they look like metal disks with a hole in the middle, then you want to throw them in the bin and go for a ride, note - you might need to adjust your fueling now, so first thing is to ride to a dyno place and get the bike tested, then listen to what the operator has to say and post up the chart so we can see if you need any carb work doing.
you will need to remove your rear panels, seat, fuel tank, airbox, carbs and the carb rubbers to get to them.
they look like metal disks with a hole in the middle, then you want to throw them in the bin and go for a ride, note - you might need to adjust your fueling now, so first thing is to ride to a dyno place and get the bike tested, then listen to what the operator has to say and post up the chart so we can see if you need any carb work doing.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said![:smt003](./images/smilies/003.gif)
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
![:smt003](./images/smilies/003.gif)
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
-
- Posts: 6
- Joined: Sun Mar 10, 2013 9:13 pm
- My Bike: zxr400
Re: removing restrictors
thanks for the help guys