removing restrictors

Moderator: Moderators

Post Reply
jonnyjackson500
Posts: 6
Joined: Sun Mar 10, 2013 9:13 pm
My Bike: zxr400

removing restrictors

Post by jonnyjackson500 »

im just coming off of my period for needing the restrictors in, ive got a 94 zxr could anybody help as to where the restrictor will be, the restrictors comre from fi international if that helps shed some light atall.
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: removing restrictors

Post by banner001 »

the restrictors are metal plates that go between the carb inlet rubbers and the head.

you will need to remove your rear panels, seat, fuel tank, airbox, carbs and the carb rubbers to get to them.

they look like metal disks with a hole in the middle, then you want to throw them in the bin and go for a ride, note - you might need to adjust your fueling now, so first thing is to ride to a dyno place and get the bike tested, then listen to what the operator has to say and post up the chart so we can see if you need any carb work doing.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: removing restrictors

Post by RedexRobB »

removal is reverse of installation ;)

viewtopic.php?f=55&t=6402
jonnyjackson500
Posts: 6
Joined: Sun Mar 10, 2013 9:13 pm
My Bike: zxr400

Re: removing restrictors

Post by jonnyjackson500 »

thanks for the help guys
Post Reply