Page 1 of 1

Where do i find the limiter?

Posted: Mon Mar 27, 2006 9:55 am
by diesel
i have a H1 and dunno if its restricted. how do i find out. where would i find the de restrictor box IF there is one fitted? its the SP model too, dunno if that makes a difference. cheers all. :smt001

Posted: Mon Mar 27, 2006 10:04 am
by RedexRobB
IF its de-restricted, there will be a little black box somewhere behind the clocks.

The clocks normally plug into the loom but is replaced by the little black box.

Posted: Mon Mar 27, 2006 10:08 am
by diesel
so if the clocks are wired to the loom then it will be restricted. if there is a black box then it isnt anymore

Posted: Mon Mar 27, 2006 10:55 am
by RedexRobB
Yep that right, if the clocks plug into the loom then its still restricted. It may be that it has never been de-restricted but who knows. You need to get yourself a de-restrictor then :)

http://feedback.ebay.co.uk/ws/eBayISAPI ... em-trading

email these guys, i think they want about 30 quid for them. :) Baz, dunno if ive already mentioned it, is it worth talking to these guys as a supplier for the site? Maybe a discount for the club?

Posted: Mon Mar 27, 2006 10:57 am
by diesel
ok. ill check it out. i never ran a speedo cable ( too tight to buy a new one ) so would it have still restricted itself. not sure what the restriction goes on?

Posted: Mon Mar 27, 2006 12:35 pm
by RedexRobB
Not entirely sure about having the speedo disconnected and the effect it would have :smt017 Well it wouldnt reach the 110mph thats for sure so i guess the restrictor wouldnt kick in, but it does right?

The restrictor is in the CDI unit, once the needle reaches 110mph (180kmh) it wont let the engine rev any higher. Putting the de-restrictor on tells the CDI it hasnt got to that speed yet so lets you rev out all the way.

Posted: Mon Mar 27, 2006 1:25 pm
by Bikerz
you cant just dissccont speedo, i tryed this, doesnt work still rev limits, you have to get uk cdi or a black box. the clocks clearly feed a positive signal to the cdi hence u cant just disscount speedo

Posted: Mon Mar 27, 2006 3:23 pm
by RedexRobB
Sorry i mean the speedo cable, if thats not connected but the clocks are connected to the loom surely that would work? Perhaps the CDI knows this by the fact that the engine is reving and you are going up in the gears.

Posted: Mon Mar 27, 2006 10:09 pm
by masterofinsanity
RobB wrote: http://feedback.ebay.co.uk/ws/eBayISAPI ... em-trading

Baz, dunno if ive already mentioned it, is it worth talking to these guys as a supplier for the site? Maybe a discount for the club?
they're not selling anything robB?

Posted: Tue Mar 28, 2006 7:15 am
by RedexRobB
You have to email them, thats what i get everyone to do if they want one, last person i spoke to i think was bikers and they told him they wanted about 30 for them. But they are willing to sell, just for some reason they dont sell em on ebay, god knows why.

Posted: Tue Mar 28, 2006 9:05 am
by diesel
my bike revs all the way in the first few gears. not had the front end replaced till now to give me confidence enough to cane it in top gear. long story :) iat a guess i spose the cdi will know what gear im in too or something along those lines?????

Posted: Tue Mar 28, 2006 2:33 pm
by Bikerz
mate get uk cdi or that black box and it will work. yeah they wanted 30 quid and 4 quid postage i think, i got a uk cdi for less than that

Posted: Tue Apr 04, 2006 7:34 pm
by richie400ss
i'm puzzled.

i've had 4 import zxr400s now, and the only advantage in the uk cdi has been an extra 400rpm, which i don't want as it's actually after the power tails off anyway.

the restriction is in speed not power, so there is a optical sensor with a flag in the speedo which kicks in at around 120mph. i just took the speedo cable off and bob's your uncle.

can be unhealthy for your licence (license?) though