Is my bike restricted?
Moderator: Moderators
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Is my bike restricted?
Hi all i passed my test on feb 14th this year and have just been cruising getting used to my bike so havent kicked it in much lol.
Well my mate came round and had a go to see if its all ok he said that it feels like it doesnt want to rev past 10k so might be restricted.
I gave it a good go the other day and it seemed fine to me but this is my first bike. is there any tell tale signs that it is or isnt restricted.
Also he said his old vfr 400 would beat it(and that was a dog compared to my zxr), im not sure if hes just jealous as he started on a 50 then 125 then to his vfr 400. Also he may think its slow as he has a 53plate gsxr 750 now which hes had a year. So if he went back to his vfr that might feel the same.
Any ideas before i start to strip also how much would a tune and carb balance cost, and anyone know anyone good in the northeast Middlesbrough area.
Its annoying me now as he keeps saying 33bhp to me lol, i kept with him quite well to 90mph when i bottled it.
Also if i take off the throttle fully when i go to put it back on it judders and struggles till after 3k any ideas?.
Thanks
Well my mate came round and had a go to see if its all ok he said that it feels like it doesnt want to rev past 10k so might be restricted.
I gave it a good go the other day and it seemed fine to me but this is my first bike. is there any tell tale signs that it is or isnt restricted.
Also he said his old vfr 400 would beat it(and that was a dog compared to my zxr), im not sure if hes just jealous as he started on a 50 then 125 then to his vfr 400. Also he may think its slow as he has a 53plate gsxr 750 now which hes had a year. So if he went back to his vfr that might feel the same.
Any ideas before i start to strip also how much would a tune and carb balance cost, and anyone know anyone good in the northeast Middlesbrough area.
Its annoying me now as he keeps saying 33bhp to me lol, i kept with him quite well to 90mph when i bottled it.
Also if i take off the throttle fully when i go to put it back on it judders and struggles till after 3k any ideas?.
Thanks
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: Is my bike restricted?
Also dont understand why a full staineless steel exhaust and pipercross filter would be added if they where restricting it.
But there is residue of glue on the front screen like l plates where on at one point..
But there is residue of glue on the front screen like l plates where on at one point..
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
-
- L-plate hell
- Posts: 363
- Joined: Sun Dec 23, 2007 10:09 pm
- My Bike: zxr400l4 zx7r
- Location: the shire of essex
Re: Is my bike restricted?
is it an import? could be the cdi or plates in the carbs.
anything is possible with enough time and money. and an open mind...
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: Is my bike restricted?
No uk bike , and dunno might be crab plates but dont want to strip it if a good balance would do the job.
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
-
- L-plate hell
- Posts: 363
- Joined: Sun Dec 23, 2007 10:09 pm
- My Bike: zxr400l4 zx7r
- Location: the shire of essex
Re: Is my bike restricted?
if its just plates on the carbs it will probably be easier to take them out first. im not sure about either but a mate can have it stripped, plates out and put back together in about half an hour. might pay you to get them balanced anyway.
anything is possible with enough time and money. and an open mind...
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: Is my bike restricted?
Looks like im gonna have to strip it and see, just wondering whether they would be a way to test before stripping
to save me stripping it again to balance carbs . i think it ok and its just him trying to find problems but i better
check anyhow. thx all
to save me stripping it again to balance carbs . i think it ok and its just him trying to find problems but i better
check anyhow. thx all
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Is my bike restricted?
Are the clocks in kms? If they are then its possible they are restricted in the clocks via the CDI, you can check by looking at the back of he clocks and see if its plugged in to the wiring loom. Also, have you had it past 110mph at all?
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: Is my bike restricted?
Clocks are in mph and im still too nervous done 90mph and thats it was gonna try faster then police helicopter started following me as my m8 was going daft in his zzr1400 kit car.. Dont trust the bike yet lol
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: Is my bike restricted?
The bike seems ok to me but feels like it could do with a tune but im a car man and dont really know bikes that much yet can strip brakes etc but carbs i find difficult.
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Is my bike restricted?
fair enough mate. check round the back of the clocks anyway and see if theres a loose connector, it could be the clock has been changed and a derestrictor not pluged in.
If theres no loose connector then your bike is probably a uk bike for certain. In which case youll need to get the air box off and look through the carbs and see if you can see anything like this in the inlets
http://www.bikepics.com/pictures/928197/
If theres no loose connector then your bike is probably a uk bike for certain. In which case youll need to get the air box off and look through the carbs and see if you can see anything like this in the inlets
http://www.bikepics.com/pictures/928197/
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: Is my bike restricted?
Checked the clocks and there is no extra wires toi go anywhere and the clocks have two sets off wires going in and both are lights..
gonna inspect all the connections to the cdi and then work to the carbs cheers for the pic redex rob that will help loads
gonna inspect all the connections to the cdi and then work to the carbs cheers for the pic redex rob that will help loads
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: Is my bike restricted?
You do not have the required permissions to view the files attached to this post.
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Is my bike restricted?
Looks ok to me, cant see extra wires. The extra wire will come out of the loom somewhere, so as long as there aren't unconnected connectors it looks liek a UK bike!
So now you need to get the airbox off and check to see if there are any restrictor plates in.
So now you need to get the airbox off and check to see if there are any restrictor plates in.
- DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: Is my bike restricted?
will do in the middle of removing my throttle as its been sticking stupid deheaded screws.
the last owner who had this bike needed some better tools.
the last owner who had this bike needed some better tools.
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: Is my bike restricted?
The little screws that tighten the clips that hold the carbs on are a pain in the ar5e to get at
In the past I've used a very long screw driver but because it's hard to get the screw driver on square the screws get damaged.
I replaced all those screws with little cap heads (allen key) now I use a ball ended allen key and it is sooooooooooooo much easier.
Any good screw/nut bolts shop will have them just take one of the old ones as a sample.............
If yer really wanting I can send you some...........very cheap good price............ much cheapness
In the past I've used a very long screw driver but because it's hard to get the screw driver on square the screws get damaged.
I replaced all those screws with little cap heads (allen key) now I use a ball ended allen key and it is sooooooooooooo much easier.
Any good screw/nut bolts shop will have them just take one of the old ones as a sample.............
If yer really wanting I can send you some...........very cheap good price............ much cheapness