i have just put a race loom on my race bike along with a ram air box when i first put the loom on i had no end can so just give the start button a quick push and the bike seemed 2 start fine, after a few days i had end can on new ram air box on etc...and now it wont start an ther is no spark either bike also had new plugs put in aswelll, i moved both coils up 2 the front fairing bracket and exteneded the leads.
anyone any thoughts to what the problem mite be?
No Spark, just installed race loom an ram air now wont start
Moderator: Moderators
-
- Posts: 4
- Joined: Sun Jul 04, 2010 4:36 pm
- My Bike: zxr400 l1
-
- Posts: 4
- Joined: Sun Jul 04, 2010 4:36 pm
- My Bike: zxr400 l1
- extonyg
- zxr400 oc member
- Posts: 405
- Joined: Tue May 12, 2009 9:40 pm
- My Bike: zxr 400 L1 uk
- Location: Portsmouth
Re: No Spark, just installed race loom an ram air now wont start
has it only happened since your moved the coils up front and 'extended' the leads? try the old leads back see if they work
-
- Posts: 4
- Joined: Sun Jul 04, 2010 4:36 pm
- My Bike: zxr400 l1
Re: No Spark, just installed race loom an ram air now wont start
aye pretty much so, was thinking that then didnt see much point in trying it as i really didnt think it would be that, im thinking maby cdi???
- extonyg
- zxr400 oc member
- Posts: 405
- Joined: Tue May 12, 2009 9:40 pm
- My Bike: zxr 400 L1 uk
- Location: Portsmouth
Re: No Spark, just installed race loom an ram air now wont start
i would be atleast tryin your old leads and coils if you did change them, before cdi as there more likley at fault rather than cdi because you said the bike run before,
also check all connections etc good and secure
also check all connections etc good and secure
-
- Posts: 4
- Joined: Sun Jul 04, 2010 4:36 pm
- My Bike: zxr400 l1
Re: No Spark, just installed race loom an ram air now wont start
tryed the old leads still the same im defo thinking cdi cause the 2 coils surely wouldnt go at the same time and thers nothing else i can think off would do it