hi everyone,
my bike needs full throttle to starts. I've already tried some mixture screw settings, but with no results. Any suggestions?
full throttle startings
Moderator: Moderators
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: full throttle startings
Tried adjusting the idle?
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: full throttle startings
check/set the valve clearances
-
- Posts: 5
- Joined: Mon Jul 06, 2009 8:31 am
- My Bike: zxr 400
Re: full throttle startings
the idle is around 1400 rpm, so it should be ok
and i'm not able (and really don't have the time ) to check the valve clearances, especially if I'm not sure about the problem
Has anyone had the same problem?
P.S. i was wondering, in order to clean the jets, can i remove the float bowl without taking off the carbs?
thank you guys (and don't look at the writing mistakes please )
and i'm not able (and really don't have the time ) to check the valve clearances, especially if I'm not sure about the problem
Has anyone had the same problem?
P.S. i was wondering, in order to clean the jets, can i remove the float bowl without taking off the carbs?
thank you guys (and don't look at the writing mistakes please )