im in need of some help my zxr stalls when i put the lights on but will stay on when i put the revs up a little it wont stall and im not sure
what it can be
if any one can help this would be great thanks
bike stalls when i put the lights on
Moderator: Moderators
-
- Posts: 5
- Joined: Sat Nov 06, 2010 9:50 am
- My Bike: tomos moped
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: bike stalls when i put the lights on
sounds like your rectifier has gone, i take it it runs fine when the lights are off?
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 5
- Joined: Sat Nov 06, 2010 9:50 am
- My Bike: tomos moped
Re: bike stalls when i put the lights on
runs fine with the lights off.
il get a new rectifier and see what happens
cheers
il get a new rectifier and see what happens
cheers
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: bike stalls when i put the lights on
Check the voltage across the battery while the engine is at 4k rpm, should be 14.5volts. Check the manual as there's a test for it. If its lower than that then yes a new rectifier is necessary.
-
- Posts: 5
- Joined: Sat Nov 06, 2010 9:50 am
- My Bike: tomos moped
Re: bike stalls when i put the lights on
does anyone know were i can get a rectifier as there around £65 on ebay is there anyware cheaper
thanks
thanks