Page 1 of 1

Hello

Posted: Fri Apr 03, 2015 12:32 pm
by Dextermckay
Just a quick hello - I've just had my ZXR400 L1 delivered this morning, with it being used as my first bike if/when I get my A2 license (hopefully by next weekend) I didn't want a pristine example due to the worry of dropping it etc.

I'll update with more photos when the weather improves, and any work that I'm planning on doing.

IMG_3438.JPG

Re: Hello

Posted: Fri Apr 03, 2015 3:24 pm
by Miles
Welcome to the forum. First thing to do is skim through the electrics section in the service manual. This can be found on the main website

Re: Hello

Posted: Fri Apr 03, 2015 3:42 pm
by Jack94x
Yay someone else on the A2 license, welcome to the forum dude! The ZXR is my first bike too and I've gotta say that even restricted it's a lot of fun biggrin Good luck with your test!

Re: Hello

Posted: Fri Apr 03, 2015 4:55 pm
by Dextermckay
Thanks for the warm welcome guys, it turns out that there was no fault with the lighting, I just hadn't found the on/side/off switch at that point in time :oops:
Did you have to alter the fuel/jetting after restricting yours Jack? (assuming that you restricted it at the carbs)
Cheers

Re: Hello

Posted: Mon Apr 06, 2015 5:11 pm
by Jack94x
Yeah mine's restricted in the carbs with the kit from FI international (http://www.fiinternational.com/ShowDeta ... e=Kawasaki). I got it put in at the same time when it was having a major service at my local dealer so don't honestly know I'm afraid, as far as I'm aware the jetting wasn't altered but the carbs were balanced after the kit was put in.