Page 1 of 1
Hellooooo
Posted: Thu Jun 28, 2007 6:42 pm
by billy big skid
Hi. the name's Allan. I live near Huddersfield and race a ZXR400L1 With NEMCRC and Darley Moor MC. I'm always on the lookout for good mods etc. So i thought i'd check out your site.
The bike is tuned but only to 74 BHP but the internals have been lightened so it spins up pretty quick, it's got Kent cams in as well, sounds well nice. It's got full Maxton suspension and ram air kit with flatslide carbs, also 2002 fireblade brake calipers with a CBR600 master cylinder.
I love it to bits.

Re: Hellooooo
Posted: Thu Jun 28, 2007 6:46 pm
by gubbs
I bet you do!
If only I knew where you lived, I would too!
How much that lot cost you? Kent cams never come up second hand.

Re: Hellooooo
Posted: Thu Jun 28, 2007 8:32 pm
by masterofinsanity
hello nilly big skid, welcome to my world! sounds like you got a nice bike there mate, hope we'll see some pics ???
Re: Hellooooo
Posted: Thu Jun 28, 2007 9:03 pm
by RedexRobB
welcome matey, we wanna see pics!!!

Re: Hellooooo
Posted: Fri Jun 29, 2007 12:53 pm
by mycallsevern
Yes pictures please!!!!!!!
Re: Hellooooo
Posted: Mon Jul 02, 2007 4:11 pm
by billy big skid
OK, firstly sorry for the late reply, i've been to Oliver's Mount, Scarborough, to watch the Cock of the north races.
I'll sort out some pictures soon, i promise. I just need to find the disc they are on. The bike was bought as it is, it's cheaper than building one, it cost three grand to buy but i got:-
The bike
front and back paddock stands
Tyre warmers
Spare Engine, gearbox, forks & shock, four spare wheels, two of them with full wet tyres on, spare head and barrels and loads of other bits and bobs.
The bike itself has carbon bodywork, full Maxton suspension rig, ram air kit, flatslide carbs and a full Micron race system. The engine has been reworked and everything lightened and balanced, the head has been gasflowed and ported, it is running total loss ignition and the starter has been removed. It's running 2002 Honda fireblade brake calipers with a CBR600 master cylinder and ZX6R discs the rear wheel is a slightly wider ZX6 item but i'm thinking of putting the OE back wheel in it so it turns quicker. I was told that it cost the thick end of 13 grand to build but i've no proof of that. I do have proof that it was used at the TT by Mike Hose,i think it was 2002 but dunno without looking. If any of you live near Croft circuit i'll be there on the 28/29 of this month so come and say hello.
Oh, and my main road bike is a ZX7R with a ZX9 engine in it. Mental!
Re: Hellooooo
Posted: Mon Jul 02, 2007 4:14 pm
by rene
foke me you got that all for 1k !! thats the bargin of the year
Sounds a lovely bike!
Re: Hellooooo
Posted: Mon Jul 02, 2007 4:19 pm
by billy big skid
No it cost £3K. Here's me at Cadwell, i normally run No.73 but some rotten swine had blagged it!
Re: Hellooooo
Posted: Mon Jul 02, 2007 4:26 pm
by rene
i think you need to work on your riding postion

Re: Hellooooo
Posted: Mon Jul 02, 2007 9:09 pm
by billy big skid
LOL!
You really do have to get the weight over the front to keep it down. However, if you are posing you just sit back and wheelie like fook!