www.zxrworld.co.uk

I need to re-locate my coils due to fitting ramair, where is best to put them?. Also, Anyone know if u just use normal HT Leads that u can buy from car auto shops in 1m lengths or does the wee ZXR need something diferent. Cheers Derek 07825 908653

I replaced all my HT leads with standard copper cored stuff from the bike spares shop and it runs a treat, so deffo no special lead required.

yeah I did this with mine just bought the regular copper core stuff from a auto factor.....works a treat.

Mine are mounted onto the front of the fairing/clocks bracket side by side I just used cable ties to hold em

I've got mine under the clocks like Cargo.

would stick coils fit? I've converted my gpz to run on zx6r stick coils, works a treat. the only tricky part is kawasaki's odd water proof connectors, so buy the little sub-loom to go with them, then solder it up directly to the low tension inputs for the coils. saves alot of space, and gives good spark, but the sticks are a little taller than normal caps, maybe 1.5 inch out the top of the head?

Stick coils work a treat, I used ZX9C coils they would be lucky to be 1/4 inch longer. Leaves plenty of room for a kit type airbox.

If you fit ramair, you can bolt them onto the top of the airbox at the front under the panel that the airhoses go into. Stick coils are also a cool option, I fitted some CBR600RR coils which worked straight away thanks to an excellent wiring guide elsewhere in this forum
The CBR coils don't stick out at all - Perfect fit !

Hi! Mys are located in the front like this: