Page 1 of 1
Brembo Master Cilynder
Posted: Sun Oct 09, 2011 9:04 pm
by zxr500man
Hello Guys,
Im after a brembo master cilynder,
Has any of you fellows any info on which is best for the track?
Any tips or info much apriciated,
Thanks again Don.
Re: Brembo Master Cilynder
Posted: Tue Oct 11, 2011 8:36 am
by mick41zxr
Using a 19 x 18 forged with short lever. Running with gsxr tokiko 4 pots & braking is fantastic
Re: Brembo Master Cilynder
Posted: Thu Oct 13, 2011 2:04 pm
by Mori Man
mick41zxr wrote:Using a 19 x 18 forged with short lever. Running with gsxr tokiko 4 pots & braking is fantastic
But the 16 works just as good with 4pots - I'll show you next week
Re: Brembo Master Cilynder
Posted: Thu Oct 13, 2011 10:07 pm
by zxr500man
whats the story with the 16/18/19/,
what dimensions are these?
size of cilynder?
thanks
Re: Brembo Master Cilynder
Posted: Fri Oct 14, 2011 12:19 am
by Mori Man
Ones piston diameter eg: 19mm
The other is stroke length eg: 20
Brembo make a range to suite their different calipers , 30/32 is fine with 16 x 18 but 32/34 your wanting to jump to 19mm & for the billet mono blocks
Re: Brembo Master Cilynder
Posted: Fri Oct 14, 2011 9:04 pm
by zxr500man
hi,
a guy here in dublin has a 19x20 brembo,
he says its just been used for a few races and is fairly new,
he is asking 250 euro???
is this a lot?
I have checked prices on ebay but there seems to be a lot of variations and different prices.
Re: Brembo Master Cilynder
Posted: Sat Nov 19, 2011 3:16 pm
by stevi5
I use a Brembo unit from a KTM RC8 with CBR 600 Calipers and they are awsome. Paid £120.00 for the master cylinder from Ebay. Hope this helps.
stevi