Page 1 of 1
Correct resistor for race loom
Posted: Mon Oct 28, 2013 7:27 pm
by wes
What 100ohm resister is required on a race loom?
I bought some .25watt 100 ohm and it still reads 12v on the grey wire
It already had an unknown blue resister fitted but drops to 7v and not spark
I believe It is supposed to drop to 9v
Any idea on where to buy or the correct spec?
Re: Correct resistor for race loom
Posted: Tue Oct 29, 2013 11:03 am
by banner001
take apart the ignition barrel and use the resistor in there...easiest way.
i think i got a 5W 100ohm resistor.
Re: Correct resistor for race loom
Posted: Tue Oct 29, 2013 12:28 pm
by wes
I don't have the original barrel....
I see a green 100ohm 5w resistor on ebay, but it's 17mmx6mm...a lot bigger than the others I have tried. Is this a good sign?
Re: Correct resistor for race loom
Posted: Tue Oct 29, 2013 1:07 pm
by gary2711
Send me your address Wes and i'll pop one in the post.
Re: Correct resistor for race loom
Posted: Fri Feb 07, 2014 7:54 pm
by supersport
can anyone help my son starting
ss 400 racing cant get a spark new
coils, leads power goin to coils but
still no spark tried another cdi
loosing the plot help
sorry if this is in wrong place not computer happy
cheers.
Re: Correct resistor for race loom
Posted: Sun Feb 09, 2014 10:05 pm
by ChowderV4
im having a similar issue, i have got a 100ohm 0.6watt blue resistor. is this more along the lines of whats needed?