Screws for choke rail

There seems to be more and more members appearing that are racing the ZXR400 so i've created a special section just for you to show off results, discuss meets etc etc.

Moderator: Moderators

Post Reply
Paul RF
Posts: 20
Joined: Mon Jan 12, 2015 7:45 am
My Bike: Yamaha R1

Screws for choke rail

Post by Paul RF » Sun Feb 01, 2015 10:34 am

Does anyone know where I can get the screws which secure the choke rail to the carbs. There are 4 of them, they have extra wide heads to bridge the slide gap if that makes sense. It might be ok with just 3 in but if I can get one I may as well use it.
cheers
Paul

fatboy
Posts: 46
Joined: Thu Dec 08, 2005 10:49 pm
My Bike: tomos moped
Location: suffolk

Re: Screws for choke rail

Post by fatboy » Sun Feb 01, 2015 1:28 pm

if I remember right they only have 3 to start with

Paul RF
Posts: 20
Joined: Mon Jan 12, 2015 7:45 am
My Bike: Yamaha R1

Re: Screws for choke rail

Post by Paul RF » Sun Feb 01, 2015 8:46 pm

Ah, do they? I will check the service manual as there are 4 holes available. If there's only meant to be 3 though that makes things easier :-)

richyrd5
Posts: 72
Joined: Fri Feb 05, 2016 12:26 pm
My Bike: 400h

Re: Screws for choke rail

Post by richyrd5 » Tue Mar 01, 2016 11:15 pm

Yep,3 as standard??

User avatar
Miles
zxr400 oc member
zxr400 oc member
Posts: 455
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

Re: Screws for choke rail

Post by Miles » Wed Mar 02, 2016 12:01 am

Cradleys is the place to go, remember to get the white plastic washers as well

User avatar
banner001
Track day God
Track day God
Posts: 2269
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: Screws for choke rail

Post by banner001 » Wed Mar 02, 2016 10:33 am

yep 3 as standard, its like this on a lot of jap bikes for some reason.
UK ZXR 400 L4
UK ZXR 400 L3 track bike
1989 FZR 1000 EXUP-R streetfighter

Post Reply