Slightly OTT?

There seems to be more and more members appearing that are racing the ZXR400 so i've created a special section just for you to show off results, discuss meets etc etc.

Moderator: Moderators

Post Reply
guitarcarrot
Posts: 85
Joined: Sun Nov 13, 2011 10:02 pm
My Bike: ZXR 400 L2
Location: Bromley

Slightly OTT?

Post by guitarcarrot » Tue Aug 18, 2015 12:04 am

Do you think I've over done it a bit?
received_10207402292358564.jpeg
ZX6r 2008 forks
320mm EBC s-drive discs
Brembo monoblocks.
You do not have the required permissions to view the files attached to this post.

User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: Slightly OTT?

Post by RedexRobB » Wed Aug 19, 2015 1:02 pm

Dont think you will be blamed for overspending on brakes!

guitarcarrot
Posts: 85
Joined: Sun Nov 13, 2011 10:02 pm
My Bike: ZXR 400 L2
Location: Bromley

Re: Slightly OTT?

Post by guitarcarrot » Thu Aug 20, 2015 6:11 pm

I got the calipers for £25 each from work! Tried them out at brands on Tuesday, put it on the front end going into paddock with one finger, absolutely terrifyingly powerful! Thinking of going up to a 20mm m/c to ease things up a bit haha! At least I know the thing stops :pmsl

Dolts
Posts: 86
Joined: Sun Oct 22, 2006 5:16 pm
My Bike: ZXR400 L4
Location: Flitwick, Beds

Re: Slightly OTT?

Post by Dolts » Thu Aug 27, 2015 9:19 pm

Did you need to make any mods to fit the front end mate?
Image

guitarcarrot
Posts: 85
Joined: Sun Nov 13, 2011 10:02 pm
My Bike: ZXR 400 L2
Location: Bromley

Re: Slightly OTT?

Post by guitarcarrot » Sat Sep 05, 2015 10:26 am

In order to use the 400 spindle yes, spacers are different as well, had to machine the spindle down by 7mm to stop it bottoming out on the nut.

Post Reply