fitting a amb transponder

There seems to be more and more members appearing that are racing the ZXR400 so i've created a special section just for you to show off results, discuss meets etc etc.

Moderator: Moderators

Post Reply
Highlander
Posts: 46
Joined: Tue Mar 23, 2004 12:52 pm
My Bike: tomos moped
Location: Scotland
Contact:

fitting a amb transponder

Post by Highlander »

Hi,

The instructions that came with it are not to clear... do they have to have a non obstrcutive view to the track... wheres best place to fit them?

Cheers
sloweracing
zxr400 oc member
zxr400 oc member
Posts: 307
Joined: Sun Mar 28, 2004 8:34 am
My Bike: tomos moped
Contact:

Post by sloweracing »

I have fitted mine on the right hand fork leg

Where you have the fork seals 2in above on the top section of the fork leg just put a bit of rubber on the fork leg then 2 cable ties to hold it on wont slide down as the fork leg gets bigger nearer the fork seals

So follow the clip ons down the fork leg then any where just check it does not catch on any thing if you turn the steering

Hope this helps
Post Reply