www.zxrworld.co.uk

I know, couldn't fecking believe it. I was expecting it to take atleast a couple of days!!
Projects realy starting to shape abit more now, it may see the road again yet!!

got a set off a r6 if anyones interested?

Hayabusa's also run the same Denso coils so they should fit too.

Haven't seen the R6's

sold the r6 ones now, sould have a set on my gsxr600 03 engine, will have a look later and maybe get some pics

here are some pics of the 03 gsxr ones, sorry about pic quality, i have a set of these and 99% that i have the loom part too,
i cant post any pics of the r6 ones as i sold them, but off the top of my head they look very similar if not the same,
i need help uploading these pics, being told they are too large, can i mail them to someone else to put on here for me? im not too good at this sort of thing lol

if they will fit the zxr and are anygood to anyone give me a shout, 99% sure i have the loom bit aswell

just checked i have got the loom
buysell/single_ad.php?ad_id=46

Just an update on what stick coils can be used:

CBR1000 are longer than you need - they still fit and work but you need to pull down the sealing grommet and they are about 25mm longer than CBR600's

These are ideal for my ZZR and ZRX motors though

You'll most likely find that ZX12-R's are the same length as the CBR1000's.

MM!

zx6r c2h coils fit straight in, just trim the rubber collar for a perfect seal.

someone off here bought my gsxr ones, no update as to whether they fit or not yet, i dont even know the members name?
who are you? lol

Is this a worth while mod to do if you have problems starting? is it basicly like using better HT leads?

it completely does away with the HT lead there is NO ht lead with this mod

The supply to the stick coils is 12v and it is stepped up to high voltage within the stick coil in the same way it happens in the standard coils.

i have a set of coil sticks here from a cbr600fy 2001 carb model i wonder would they be compatable.

HI,

Well I can certainly say that this mod works! even on the L model! As MM did do the mod on a H.

Airbox doesn't even twat the sticks so it's all good under there, just replace the OEM coils with 4 penny washers and 4 bolts to hold up that infill bracket.

Don't really notice any much more difference apart from a much more smoother idle. I only did this mod as I was sick of my coils leaking after replacing them 6 times! 3 new leads and 8 new caps! gave up in the end lol. No leaks at all with this mod so I take my hat of to you MM

Regards

Rich

Result ! - good to hear Rich

Can't say I have any desire to go back to coils myself and I've got a freakin box full of the fookers with quality HT's on them too