There seems to be an intermittent fault with the hosts server, Bear with us whilst we try and resolve it.

Parts from other bikes which fit the ZXR

This forum is for informative threads, if you feel a topic should be in here then let us know and we will move it.

Moderator: Moderators

Scrindle
Posts: 1
Joined: Mon Jan 31, 2011 9:17 pm
My Bike: BMW R1200 GS

Re: Parts from other bikes which fit the ZXR

Post by Scrindle » Tue Feb 01, 2011 10:06 am

This may turn your stomachs people but I want a front and rear end for my... Yam 350 powervalve.

H model yokes and forks fit straight on, but are they the same size yokes as the L models?

Same with the swingarm, the H fits with minimal adjustment (to the Yam frame) but is the L swingarm the same width as the H model?

If any of you lot are breaking a bike and can offer the parts I need I can come and collect as long as your not too far away.(I'm in the north west around Leyland M6 J28)



User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1995
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: Parts from other bikes which fit the ZXR

Post by Mori Man » Tue Feb 01, 2011 10:29 am

:smt005 Good way to introduce yourself to the forum :smt002

L yokes have bigger centre pin and also they are 1mm larger on bottom clamp - not sure if top bridge is same or not. L yokes allow modern USDs like off the ZX636 , ZX10-R to be used and get radial brakes, no speedo drive though unless you use standard wheel and get spcers made up.

H1 / H2 Swingers are different looking to each other , H1 has upper subframe and H2 looks like the L model arm but both are same dimesions. L model arm uses a larger axle pin and has a double bearing set up one end and pretty sure its a tad wider too mounting into the frame.

Good luck on your hunt,

MM!

BTW, should your project get off the ground your welcome to post pics of build in the other bikes section :-)


Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly

Fisher
Posts: 60
Joined: Thu Mar 01, 2012 9:49 pm
My Bike: ZXR 400 L4
Location: Basingstoke, Hampshire.

Re: Parts from other bikes which fit the ZXR

Post by Fisher » Wed Mar 07, 2012 9:26 pm

Any other rear brake levers that would fit our bike?
I broke mine :(

Any universal ones perhaps?

A second hand one on eBay is looking to be £30 odd...



Fisher
Posts: 60
Joined: Thu Mar 01, 2012 9:49 pm
My Bike: ZXR 400 L4
Location: Basingstoke, Hampshire.

Re: Parts from other bikes which fit the ZXR

Post by Fisher » Wed Mar 07, 2012 9:29 pm

Or some cheap rearsets?



Fisher
Posts: 60
Joined: Thu Mar 01, 2012 9:49 pm
My Bike: ZXR 400 L4
Location: Basingstoke, Hampshire.

Re: Parts from other bikes which fit the ZXR

Post by Fisher » Wed Mar 07, 2012 9:48 pm




User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8057
Joined: Thu Aug 29, 2002 12:36 am
My Bike: FZS600
Location: England
Contact:

Re: Parts from other bikes which fit the ZXR

Post by masterofinsanity » Wed Apr 04, 2012 4:30 am

great little idea but it aint gonna get you home unless you happen to have one in your pocket at the time.



Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.

Fisher
Posts: 60
Joined: Thu Mar 01, 2012 9:49 pm
My Bike: ZXR 400 L4
Location: Basingstoke, Hampshire.

Re: Parts from other bikes which fit the ZXR

Post by Fisher » Tue Apr 10, 2012 7:32 pm

It lives under my seat, in my tool kit :)



Cadorna
zxr400 oc member
zxr400 oc member
Posts: 27
Joined: Sat Dec 04, 2010 7:16 pm
My Bike: ZXR400 H1 '90

Re: Parts from other bikes which fit the ZXR

Post by Cadorna » Sat Jul 07, 2012 3:34 am

CaNsA wrote:zx6r f1 rear shock.

shave a couple of mm from either side the top fixing hole carrier bit.
Hi,

That's apply to an H1 model too ? My rear shock is dying ... may I replace it by an L or ZX6R F1 ones ? oldman



Tonck1
Posts: 1
Joined: Sat Mar 31, 2012 10:51 pm

Re: Parts from other bikes which fit the ZXR

Post by Tonck1 » Sat Jan 05, 2013 8:24 am

Can anyone tell me if there are any bigger engines that would fit in without much stress?



Cadorna
zxr400 oc member
zxr400 oc member
Posts: 27
Joined: Sat Dec 04, 2010 7:16 pm
My Bike: ZXR400 H1 '90

Re: Parts from other bikes which fit the ZXR

Post by Cadorna » Sun Mar 03, 2013 1:40 am

Kawasaki ZXR 750 H throttle cables part numbers 54012-1314 & 54012-1315 doesn't fit on H model. I bought them on Cradley Kawasaki to fit on my bike after reading that on this thread, but they are different and shorter, please, update the thread !



Columbo
Posts: 91
Joined: Thu Jan 03, 2013 1:26 am
My Bike: ZXR 400 L9

Re: Parts from other bikes which fit the ZXR

Post by Columbo » Fri Mar 15, 2013 4:10 am

Anyone know if ZX6 discs will fit?

Looking at a set of brembo discs.



User avatar
banner001
Track day God
Track day God
Posts: 2164
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: Parts from other bikes which fit the ZXR

Post by banner001 » Fri Mar 15, 2013 2:20 pm

Columbo wrote:Anyone know if ZX6 discs will fit?

Looking at a set of brembo discs.
they fit H models, but not L models, H are 300mm disks, L are 310mm disks.

any 310mm 5-bolt disk should fit....should...


UK ZXR 400 L4
UK ZXR 400 L3 track bike
1989 FZR 1000 EXUP-R streetfighter

Columbo
Posts: 91
Joined: Thu Jan 03, 2013 1:26 am
My Bike: ZXR 400 L9

Re: Parts from other bikes which fit the ZXR

Post by Columbo » Sun Mar 17, 2013 12:21 am

So the L9 I bought has aftermarket indicators.
The PO hadn't fitted Indy Spacers to fill the huge hole in the fairing.

Can't find any ZXR 400 specific ones.
Will they fit from a ZX6?



Cadorna
zxr400 oc member
zxr400 oc member
Posts: 27
Joined: Sat Dec 04, 2010 7:16 pm
My Bike: ZXR400 H1 '90

Re: Parts from other bikes which fit the ZXR

Post by Cadorna » Sun Mar 17, 2013 12:42 am

Columbo wrote:So the L9 I bought has aftermarket indicators.
The PO hadn't fitted Indy Spacers to fill the huge hole in the fairing.

Can't find any ZXR 400 specific ones.
Will they fit from a ZX6?
Why don't you try these ?

http://www.ebay.co.uk/sch/i.html?_trksi ... &_from=R40

I fited them on my H1, but I can't remember wich one exactly ...

Here is another link:

http://www2.louis.de/index.php?topic=ar ... L5&lang=en



Columbo
Posts: 91
Joined: Thu Jan 03, 2013 1:26 am
My Bike: ZXR 400 L9

Re: Parts from other bikes which fit the ZXR

Post by Columbo » Sun Mar 17, 2013 12:24 pm

Cheers for the reply.

I get the feeling that OEM Kawasaki indicators are all the same shape.
Is that the case?



Post Reply