L upgrade - suspension/wheels
Posted: Fri Feb 20, 2009 12:51 pm
Just noticed that the ZX9R uses the same headstock bearings as the L so the front end will be a straight drop in job
Depending on fork length you might need to drop them slightly to match original rake/trail.
You can also use ZXR750 front and rear set up too !
Be warned these are coveted for ZRX11/1200 conversion so prices might be high!
I also have a photo (or two) of the ZX9R rear wheel fitted up in a L swingarm - there appears to be no additional spacer work involved, this puts you up to a 5.5" rim and coupled with the front end gives a perfect match
MM!
Depending on fork length you might need to drop them slightly to match original rake/trail.
You can also use ZXR750 front and rear set up too !
Be warned these are coveted for ZRX11/1200 conversion so prices might be high!
I also have a photo (or two) of the ZX9R rear wheel fitted up in a L swingarm - there appears to be no additional spacer work involved, this puts you up to a 5.5" rim and coupled with the front end gives a perfect match
MM!