Page 1 of 1
Zxr400 to Zx6r Look after crush
Posted: Fri Mar 11, 2011 9:34 pm
by dayside69
Re: Zxr400 to Zx6r Look after crush
Posted: Fri Mar 11, 2011 9:59 pm
by CaNsA
Full of awesome
Re: Zxr400 to Zx6r Look after crush
Posted: Fri Mar 11, 2011 10:16 pm
by cdstirland81
blinking awesome! want more pics! (and maybe a talk through of the build/fit?)
Re: Zxr400 to Zx6r Look after crush
Posted: Sun Mar 13, 2011 9:25 pm
by dayside69
My friend cdstirland81 it wasn't to difficult. I tried to use the original bolt places to fit it.
For the front part the only think i changed was the two side metal parts on the frame.
For the tail , i chop about 4cm of the end of the subframe tail end to fit excactly as i wonted to.
As you can see it is from polyester so you can cut and glue to fit it as you need.
I will try to upload more photos.
Sorry for my english!
Re: Zxr400 to Zx6r Look after crush
Posted: Mon Mar 28, 2011 9:37 pm
by masterofinsanity
nice to see something different done to a zxr400, bet that gets talked about?!
Re: Zxr400 to Zx6r Look after crush
Posted: Tue Sep 13, 2011 2:03 pm
by dayside69
Uploaded with
ImageShack.us
In this pics,
http://imageshack.us/g/62/52846340.jpg/ , there is a new exhust end that i make, a stabilizater from a yamaha r1 '05 with custom made mounts by me, fiberglass tail and the original chain cover that i cut to keep it as protector for the water pump.
and a new set of michelin power one (120/70 front 160/60 back),and i loved the way zxr turns with this tyres
