Turtle the L7

Here's a chance to show off your zxr400, so get them digital cameras out and show us some piccies.Rebuilding your bike or modding it then let everyone in on it.

Moderator: Moderators

Post Reply
cookiesol
Posts: 77
Joined: Thu Feb 02, 2012 12:15 pm
My Bike: ZXR 400 L7
Location: Singapore

Turtle the L7

Post by cookiesol »

missus pregnant and I crashed the 1098 so all's been quiet for a while.
decide to try and finish up Turtle
in case anyone might be interested, i'll list the things done at the bottom for reference.

Anyways... Drew has been super as usual and got me a sleek set of titanium Beet downpipes.

Image

I bolted on a set of titanium K-Factory GP can to finish off the zorst setup.

Image

reckon she's at high 60s or low 70s bhp right now on dyno.
last dyno was around 65 bhp before the exhaust change and carbs syn.
performs like a gem on the tracks.

some idea of how she sounds like now.




Pity the carbon fairings didn't fall through since the vendor didnt deliver.
anyways, heres some pictures of how she looks like now


Image


Image



Things Done

Handling
ZXR 400 SP Rear shock *Re-valved*
Tsukigi copy CNC rearsets
Steering cone / Bearings
Fork oil/seal/ dust cover
Alignment of rims *front & rear*
Dunlop Alpha12 Tires
Wheel bearings
Swingarm bearings
NHK Steering damper with mounts *not installed yet*

Carbon Goodies/Weight Reduction
Carbon style mini brake reservoir
Carbon yoke protector
Titanium bolts *Full Fairings*
Titanium bolts *Windscreen*
Titanium bolts *Fuel tank cap*
Titanium bolts *Rear Hugger*
Titanium bolts *Chain Guard*
Titanium nuts *Sprocket*
Coerce Carbon fender and chain guard
SP Single seat cowl

Brakes
Brembo RCS19 master cylinder (front)
K3 GSXR750 calipers (Front)
Caliper bush (Front)
Brembo master cylinder (Rear)
Venhill brake hose (Front & rear)
Braking cm55 pads x2
Braking front rotor *WK006R, WK006L*

Cooling System
Samco sport hose & clamp set
Water wetter coolant

Power up/Engine Misc
BEET titanium exhaust headers
K-Factory titanium GP end can
K & N airfilter
SP Camshafts
Dynojet kit *Stage 1*
Afam Sprocket *15 Front*
XAM rear Sprocket *47 Rear*
K & P Performance Oil Filter
Porting
Skimmed cylinder heads
Fuel Broquet 8t

Engine overhaul
Top Engine replaced

Clutch rebuild
Clutch gasket
Clutch cable
Steel plates
Friction plates
Clutch housing

Electronics
Main wire loom
Sub wire loom
EarthX Lithium Battery

Maintenance/Rebuild/Misc
Shorty adjustable levers (brake & clutch)
Headlight protector
Throttle cables
Anodised titainium billet chain adjuster block
Copper exhaust gasket x4
Carb rebuild kit x4
Fuel filter
Fuel pump
Fairing infill
Denso Iridium plugs
Stainless steel L shape tire valves
DID X ring gold chain
Swingarm bobbins
Cush drive
Mirrors *Stock*
Bagster tank bra
Starter motor
MRA Bubble screen
cookiesol
Posts: 77
Joined: Thu Feb 02, 2012 12:15 pm
My Bike: ZXR 400 L7
Location: Singapore

Re: Turtle the L7

Post by cookiesol »

a track session with Turtle before the seat cowl was changed

Image

Image
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: Turtle the L7

Post by Mori Man »

:smt003

Nice track shots
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Top-shaggy
zxr400 oc member
zxr400 oc member
Posts: 128
Joined: Sat Aug 30, 2014 12:03 am
My Bike: KR-1R
Location: NE Derbyshire

Re: Turtle the L7

Post by Top-shaggy »

Liking the look and sound of the k-factory can !!
Makes the muzzy look enooooooooooormous in comparison biggrin
We are we're we are..
cookiesol
Posts: 77
Joined: Thu Feb 02, 2012 12:15 pm
My Bike: ZXR 400 L7
Location: Singapore

Re: Turtle the L7

Post by cookiesol »

Mori Man wrote::smt003

Nice track shots
something for "Mori Man" to w@nk on.

Image
Post Reply