Right I've now started on the clutch.
Putting the friction plates back in. In the manual it said that the last friction plate is to be fitted like image below!
However when i took it out they were all in the same groove.
Its an L model engine. Should i put it back the way it came out or like what the H manual says???
New Track Bike
Moderator: Moderators
- U_h0rnet5
- zxr400 oc member
- Posts: 276
- Joined: Mon Jun 26, 2006 11:48 pm
- My Bike: ZXR400
- Location: Watford
- Contact:
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: New Track Bike
did mine like the manual says mate
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 88
- Joined: Sun Oct 22, 2006 5:16 pm
- My Bike: ZXR400 L4
- Location: Congleton
Re: New Track Bike
What d you mean by this Zimm? can you show pics too please and will anysilicone do to replace the base gasket, like bathroom sealer?zimm wrote:....... slot the pickup for the ignition so you can advance the timing by 3 or 4 degree's......
Cheers, Gareth